Jump to content

Cycloalkane

From Wikipedia, the free encyclopedia
Ball-and-stick model of cyclobutane

In organic chemistry, the cycloalkanes (also called naphthenes, but distinct from naphthalene) are the monocyclic saturated hydrocarbons.[1] In other words, a cycloalkane consists only of hydrogen and carbon atoms arranged in a structure containing a single ring (possibly with side chains), and all of the carbon-carbon bonds are single. The larger cycloalkanes, with more than 20 carbon atoms are typically called cycloparaffins. All cycloalkanes are isomers of alkenes.[2]

The cycloalkanes without side chains (also known as monocycloalkanes) are classified as small (cyclopropane and cyclobutane), common (cyclopentane, cyclohexane, and cycloheptane), medium (cyclooctane through cyclotridecane), and large (all the rest).

Besides this standard definition by the International Union of Pure and Applied Chemistry (IUPAC), in some authors' usage the term cycloalkane includes also those saturated hydrocarbons that are polycyclic.[2] In any case, the general form of the chemical formula for cycloalkanes is CnH2(n+1−r), where n is the number of carbon atoms and r is the number of rings. The simpler form for cycloalkanes with only one ring is CnH2n.

Nomenclature

[edit]
See also: IUPAC nomenclature
See also: Alkanes
Norbornane (also called bicyclo[2.2.1]heptane)

Unsubstituted cycloalkanes that contain a single ring in their molecular structure are typically named by adding the prefix "cyclo" to the name of the corresponding linear alkane with the same number of carbon atoms in its chain as the cycloalkane has in its ring. For example, the name of cyclopropane (C3H6) containing a three-membered ring is derived from propane (C3H8) - an alkane having three carbon atoms in the main chain.

The naming of polycyclic alkanes such as bicyclic alkanes and spiro alkanes is more complex, with the base name indicating the number of carbons in the ring system, a prefix indicating the number of rings ( "bicyclo-" or "spiro-"), and a numeric prefix before that indicating the number of carbons in each part of each ring, exclusive of junctions. For instance, a bicyclooctane that consists of a six-membered ring and a four-membered ring, which share two adjacent carbon atoms that form a shared edge, is [4.2.0]-bicyclooctane. That part of the six-membered ring, exclusive of the shared edge has 4 carbons. That part of the four-membered ring, exclusive of the shared edge, has 2 carbons. The edge itself, exclusive of the two vertices that define it, has 0 carbons.

There is more than one convention (method or nomenclature) for the naming of compounds, which can be confusing for those who are just learning, and inconvenient for those who are well-rehearsed in the older ways. For beginners, it is best to learn IUPAC nomenclature from a source that is up to date,[3] because this system is constantly being revised. In the above example [4.2.0]-bicyclooctane would be written bicyclo[4.2.0]octane to fit the conventions for IUPAC naming. It then has room for an additional numerical prefix if there is the need to include details of other attachments to the molecule such as chlorine or a methyl group. Another convention for the naming of compounds is the common name, which is a shorter name and it gives less information about the compound. An example of a common name is terpineol, the name of which can tell us only that it is an alcohol (because the suffix "-ol" is in the name) and it should then have a hydroxyl group (–OH) attached to it.

The IUPAC naming system for organic compounds can be demonstrated using the example provided in the adjacent image. The base name of the compound, indicating the total number of carbons in both rings (including the shared edge), is listed first. For instance, "heptane" denotes "hepta-", which refers to the seven carbons, and "-ane", indicating single bonding between carbons. Next, the numerical prefix is added in front of the base name, representing the number of carbons in each ring (excluding the shared carbons) and the number of carbons present in the bridge between the rings. In this example, there are two rings with two carbons each and a single bridge with one carbon, excluding the carbons shared by both the rings. The prefix consists of three numbers that are arranged in descending order, separated by dots: [2.2.1]. Before the numerical prefix is another prefix indicating the number of rings (e.g., "bicyclo+"). Thus, the name is bicyclo[2.2.1]heptane.

Cycloalkanes as a group are also known as naphthenes, a term mainly used in the petroleum industry.[4]

Properties

[edit]

Cycloalkanes are similar to alkanes in their general physical properties, but they have higher boiling points, melting points, and densities than alkanes. This is due to stronger London forces because the ring shape allows for a larger area of contact. Containing only C–C and C–H bonds, unreactivity of cycloalkanes with little or no ring strain (see below) are comparable to non-cyclic alkanes.

Table of cycloalkanes

[edit]
Alkane Formula Melting point [°C] Boiling point [°C] Liquid density [g·cm−3] (at 20 °C)
Cyclopropane C3H6 -128 -33
Cyclobutane C4H8 -91 12.5 0.720
Cyclopentane C5H10 -93.9 49.2 0.751
Cyclohexane C6H12 6.5 80.7 0.778
Cycloheptane C7H14 -12 118.4 0.811
Cyclooctane C8H16 14.5[5] 151.2[6] 0.840[7]
Cyclononane C9H18 10–11 169 0.8534
Cyclodecane C10H20 9–10 201 0.871
Cycloundecane C11H22 -7.2[8]: 1613 [a] 179–181[10]: 142  0.81[10]: 142 
Cyclododecane C12H24 60.4[11] 244.0[12] 0.855 (extrapolated)[13]
Cyclotridecane C13H26 22[14] 112–113 (at 9 Torr) 0.86[10]: 143 
Cyclotetradecane C14H28 54–55.5[14] 131 (at 11 Torr) 0.83 (at 75 °C)[10]: 143 
Cyclopentadecane C15H30 65–66[14] 45–60 (at 5 Torr) 0.8364 (at 61.5 °C)[15]: 518 
Cyclohexadecane C16H32 62–63[14] 319 0.82 (at 72 °C)[10]: 144 
Cycloheptadecane C17H34 64–67[14] 0.82 (at 77 °C)[10]: 145 
Cyclooctadecane C18H36 74–75[14] 0.82 (at 76 °C)[10]: 145 
Cyclononadecane C19H38 79–82[14]
Cycloeicosane C20H40 61–62[14]

Conformations and ring strain

[edit]
Main article: Strain (chemistry)

In cycloalkanes, the carbon atoms are sp3 hybridized, which would imply an ideal tetrahedral bond angle of 109° 28′ whenever possible. Owing to evident geometrical reasons, rings with 3, 4, and (to a small extent) also 5 atoms can only afford narrower angles; the consequent deviation from the ideal tetrahedral bond angles causes an increase in potential energy and an overall destabilizing effect. Eclipsing of hydrogen atoms is an important destabilizing effect, as well. The strain energy of a cycloalkane is the increase in energy caused by the compound's geometry, and is calculated by comparing the experimental standard enthalpy change of combustion of the cycloalkane with the value calculated using average bond energies. Molecular mechanics calculations are well suited to identify the many conformations occurring particularly in medium rings.[9]: 16–23 

Ring strain is highest for cyclopropane, in which the carbon atoms form a triangle and therefore have 60° C–C–C bond angles. There are also three pairs of eclipsed hydrogens. The ring strain is calculated to be around 120 kJ mol−1.

Cyclobutane has the carbon atoms in a puckered square with approximately 90° bond angles; "puckering" reduces the eclipsing interactions between hydrogen atoms. Its ring strain is therefore slightly less, at around 110 kJ mol−1.

For a theoretical planar cyclopentane the C–C–C bond angles would be 108°, very close to the measure of the tetrahedral angle. Actual cyclopentane molecules are puckered, but this changes only the bond angles slightly so that angle strain is relatively small. The eclipsing interactions are also reduced, leaving a ring strain of about 25 kJ mol−1.[16]

In cyclohexane the ring strain and eclipsing interactions are negligible because the puckering of the ring allows ideal tetrahedral bond angles to be achieved. In the most stable chair form of cyclohexane, axial hydrogens on adjacent carbon atoms are pointed in opposite directions, virtually eliminating eclipsing strain. In medium-sized rings (7 to 13 carbon atoms) conformations in which the angle strain is minimised create transannular strain or Pitzer strain. At these ring sizes, one or more of these sources of strain must be present, resulting in an increase in strain energy, which peaks at 9 carbons (around 50 kJ mol−1). After that, strain energy slowly decreases until 12 carbon atoms, where it drops significantly; at 14, another significant drop occurs and the strain is on a level comparable with 10 kJ mol−1. At larger ring sizes there is little or no strain since there are many accessible conformations corresponding to a diamond lattice.[9]

Ring strain can be considerably higher in bicyclic systems. For example, bicyclobutane, C4H6, is noted for being one of the most strained compounds that is isolatable on a large scale; its strain energy is estimated at 267 kJ mol−1.[17][18]

Reactions

[edit]

Cycloalkanes, referred to as naphthenes, are a major substrate for the catalytic reforming process.[19] In the presence of a catalyst and at temperatures of about 495 to 525 °C, naphthenes undergo dehydrogenation to give aromatic derivatives:

noice
noice

The process provides a way to produce high octane gasoline.

In another major industrial process, cyclohexanol is produced by the oxidation of cyclohexane in air, typically using cobalt catalysts:[20]

2 C6H12 + O2 → 2 C6H11OH

This process coforms cyclohexanone, and this mixture ("KA oil" for ketone-alcohol oil) is the main feedstock for the production of adipic acid, used to make nylon.

The small cycloalkanes – in particular, cyclopropane – have a lower stability due to Baeyer strain and ring strain. They react similarly to alkenes, though they do not react in electrophilic addition, but in nucleophilic aliphatic substitution. These reactions are ring-opening reactions or ring-cleavage reactions of alkyl cycloalkanes.

Preparation

[edit]

Many simple cycloalkanes are obtained from petroleum. They can be produced by hydrogenation of unsaturated, even aromatic precursors.

Numerous methods exist for preparing cycloalkanes by ring-closing reactions of difunctional precursors. For example, diesters are cyclized in the Dieckmann condensation:

The Dieckmann condensation
The Dieckmann condensation

The acyloin condensation can be deployed similarly.

For larger rings (macrocyclizations) more elaborate methods are required since intramolecular ring closure competes with intermolecular reactions.

The Diels-Alder reaction, a [4+2] cycloaddition, provides a route to cyclohexenes:

The Dieckmann condensation
The Dieckmann condensation

The corresponding [2+2] cycloaddition reactions, which usually require photochemical activation, result in cyclobutanes.

See also

[edit]

Notes

[edit]
  1. ^ Cycloundecane's anomalously low melting point is attributable to its large number of conformers of similar stability near room temperature.[9]: 22 

References

[edit]
  1. ^ IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2014) "Cycloalkane". doi:10.1351/goldbook.C01497
  2. ^ a b "Alkanes & Cycloalkanes". www2.chemistry.msu.edu. Retrieved 2022-02-20.
  3. ^ "Blue Book". iupac.qmul.ac.uk. Retrieved 2023-04-01.
  4. ^ Fahim, MA, et al. (2010). Fundamentals of Petroleum Refining. p. 14. doi:10.1016/C2009-0-16348-1. ISBN 978-0-444-52785-1.
  5. ^ "ECHA CHEM". chem.echa.europa.eu.
  6. ^ "ECHA CHEM". chem.echa.europa.eu.
  7. ^ "ECHA CHEM". chem.echa.europa.eu.
  8. ^ Ruzicka, L; Plattner, PA; Wild, H (January 1946). "209. Zur Kenntnis des Kohlenstoffringes. (40. Mitteilung). Über die Schmelzpunkte in der Reihe der Polymethylen-Kohlenwasserstoffe von Cyclo-propan bis Cyclo-octadecan" [209. On carbon rings. (Part 40). On the melting points in the series of polymethylene hydrocarbons from cyclopropane to cyclooctadecane]. Helvetica Chimica Acta (in German). 29 (6): 1611–1615. doi:10.1002/hlca.19460290631.
  9. ^ a b c Dragojlovic, Veljko (2015). "Conformational analysis of cycloalkanes" (PDF). Chemtexts. 1 (3): 14. Bibcode:2015ChTxt...1...14D. doi:10.1007/s40828-015-0014-0. S2CID 94348487.
  10. ^ a b c d e f g Egloff, Gustav (1940). Physical constants of hydrocarbons. Vol. 2 : Cyclanes, cyclenes, cyclynes, and other alicyclic hydrocarbons. Reinhold Publishing Corporation.
  11. ^ "ECHA CHEM". chem.echa.europa.eu.
  12. ^ "ECHA CHEM". chem.echa.europa.eu.
  13. ^ "ECHA CHEM". chem.echa.europa.eu. The density of cyclododecane was measured at 8 temperatures between 66 and 134 °C with a dilatometer. Extrapolation to 20 °C leads to 0.855 g·cm−3.
  14. ^ a b c d e f g h Dale, Johannes; Hubert, A. J.; King, G. S. D. (1963). "13. Macrocyclic compounds. Part I. Synthesis of macrocyclic polyynes: conformational effects in ring formation and in physical properties". Journal of the Chemical Society (Resumed): 77. doi:10.1039/JR9630000073.
  15. ^ Ruzicka, L.; Brugger, W.; Pfeiffer, M.; Schinz, H.; Stoll, M. (January 1926). "Zur Kenntnis des Kohlenstoffringes VI. Über die relative Bildungsleichtigkeit, die relative Beständigkeit und den räumlichen Bau der gesättigten Kohlenstoffringe" [On carbon rings VI. On the relative ease of formation, the relative stability and the spatial structure of the saturated carbon rings]. Helvetica Chimica Acta (in German). 9 (1): 499–520. doi:10.1002/hlca.19260090164.
  16. ^ McMurry, John (2000). Organic chemistry (5th ed.). Pacific Grove, CA: Brooks/Cole. p. 126. ISBN 0534373674.
  17. ^ Wiberg, K. B. (1968). "Small Ring Bicyclo[n.m.0]alkanes". In Hart, H.; Karabatsos, G. J. (eds.). Advances in Alicyclic Chemistry. Vol. 2. Academic Press. pp. 185–254. ISBN 9781483224213.
  18. ^ Wiberg, K. B.; Lampman, G. M.; Ciula, R. P.; Connor, D. S.; Schertler, P.; Lavanish, J. (1965). "Bicyclo[1.1.0]butane". Tetrahedron. 21 (10): 2749–2769. doi:10.1016/S0040-4020(01)98361-9.
  19. ^ Irion, Walther W.; Neuwirth, Otto S. (2000). "Oil Refining". Ullmann's Encyclopedia of Industrial Chemistry. doi:10.1002/14356007.a18_051. ISBN 3-527-30673-0.
  20. ^ Michael Tuttle Musser "Cyclohexanol and Cyclohexanone" in Ullmann's Encyclopedia of Industrial Chemistry, Wiley-VCH, Weinheim, 2005.
[edit]
Retrieved from "https://en.wikipedia.org/w/index.php?title=Cycloalkane&oldid=1265116795"